Author Topic: Bourbon Abeille  (Read 10495 times)

Offline Das boot

  • Just popping in
  • Posts: 5
    • View Profile
Bourbon Abeille
« on: May 05, 2014, 12:32:27 PM »
Hi
I

Offline rgr004

  • Home away from home
  • ****
  • Posts: 237
    • View Profile
Re: Bourbon Abeille
« Reply #1 on: May 05, 2014, 01:04:16 PM »
Hi Brian,

The MRB plan may be lacking details but it is definitively based upon actual drawings.

Suggest you get that one and improve d

Offline Das boot

  • Just popping in
  • Posts: 5
    • View Profile
Re: Bourbon Abeille
« Reply #2 on: May 06, 2014, 04:36:13 PM »
Hi Roland

Have orderet the (MRB) plan over Bourbon Abeille today, so will be interest to see in a few days how good the plan are. The most important are the drawings of the frames to construct the hull, if I just can built the hull, then anything else is able to be built out of what you see on pictures.

Regards Brian....

Offline Ron' Breizh

  • Not too shy to talk
  • *
  • Posts: 31
    • View Profile
Re: Bourbon Abeille
« Reply #3 on: May 07, 2014, 06:05:58 AM »
Hi Brian,

Could you give me your e-mail adress?
I have something for you.

Ron

Offline Das boot

  • Just popping in
  • Posts: 5
    • View Profile
Re: Bourbon Abeille
« Reply #4 on: May 09, 2014, 03:34:09 PM »
Hi Ron

Have send you a PM

Regards
Brian.

Offline smithy166

  • Oceangoing OOW (STCW II/1)
  • Quite a regular
  • **
  • Posts: 65
  • In a hole.
    • View Profile
Re: Bourbon Abeille
« Reply #5 on: May 10, 2014, 12:23:49 AM »
I've been trying to get hold of a set of plans for the Abeille Bourbon for ages! I looked at the MRB plans, but unfortunately they're on paper - and I need a digital set, as I work in 3D. Does anyone know of anywhere that either sells (or preferably, freely distributes) digital versions of the Abbeille Bourbon plans (mainly the linesplan, I can work out the rest from the internet!).
Enough torque to restart a dead planet! OOW with an unlimited CoC looking for work. :)

Offline Das boot

  • Just popping in
  • Posts: 5
    • View Profile
Re: Bourbon Abeille
« Reply #6 on: May 10, 2014, 01:39:38 PM »
Hi Smithy166

On the german modelsite www.rc-modellbau-schiffe.de there is a user named "Deadwood", his real name are Ralph, he have made the Bourbon Abeille line drawings in 3D, try to contact him for help. The lineplan are on the forum of the german site, so you can look at it first, hopefully this can help you. I still need my plans on paper ;-)

Regards Brian.

Offline Tuomas Romu

  • Home away from home
  • ****
  • Posts: 373
    • View Profile
Re: Bourbon Abeille
« Reply #7 on: May 10, 2014, 01:46:38 PM »
Perhaps it would help to search with the ship's real name, "Abeille Bourbon"...

Offline Alex New Zealand

  • Newcomer
  • Posts: 3
    • View Profile
Re: Bourbon Abeille
« Reply #8 on: October 12, 2021, 12:47:29 AM »
Hi All,

I would like to get plans to make a Model of this ship.

Any hints of where to get plans from or other assistance would be much appreciated.

Alex
[email protected]

Offline Bj

  • Supporter
  • Home away from home
  • ****
  • Posts: 326
    • View Profile

Offline rgr004

  • Home away from home
  • ****
  • Posts: 237
    • View Profile
Re: Bourbon Abeille
« Reply #10 on: October 12, 2021, 08:17:03 AM »
Hi Alex,

A large folder about Abeille Bourbon is "in the air" towards NZ through Wetransfer, hope you will enjoy it.

Take care / Roland

Offline Bj

  • Supporter
  • Home away from home
  • ****
  • Posts: 326
    • View Profile
Re: Bourbon Abeille
« Reply #11 on: October 12, 2021, 10:01:25 PM »

Offline Alex New Zealand

  • Newcomer
  • Posts: 3
    • View Profile
Re: Bourbon Abeille
« Reply #12 on: October 13, 2021, 02:13:52 AM »
Hi Roland,

Thank you very much for the photos of this lovely ship.
I hope one day I will have a RC model of her.

I appreciate your time and effort.

Thanks

Alex[quote author=Bj

Offline Alex New Zealand

  • Newcomer
  • Posts: 3
    • View Profile
Re: Bourbon Abeille
« Reply #13 on: October 13, 2021, 02:20:58 AM »
Hi Bjorn,

Thanks for the lint to the photo and details.
Much apreaticated.

The link to a page where there is drawing comes up with a page that looks to require payment.

I can not read the language.  Speak English only sorry.

Can I access a English version of the page and if so how?

Again thanks for you assistance.

Alex

Offline Bj

  • Supporter
  • Home away from home
  • ****
  • Posts: 326
    • View Profile
Re: Bourbon Abeille
« Reply #14 on: October 13, 2021, 02:13:39 PM »
Turn on translation in Microsoft Edge
Microsoft Edge is set to offer translation by default, but if this setting is disabled for any reason, you'll need to set it again. To specify whether Microsoft Edge offers translation:

In the upper corner of your browser, select Settings and more <null> > Settings.

Click Language.

Turn on Offers to translate pages that aren't in a language I'm reading.

By default, Microsoft Edge is the same language as your system. For information about setting the language for Microsoft Edge, see Using Microsoft Edge in a different language.

 

SMF spam blocked by CleanTalk