ShipSpotting.com Forum
Shipspotters all over the world => Shipping News and information => Topic started by: MattB on December 03, 2019, 08:59:42 PM
-
Hi Forum,
Will delete once ascertained.
I was wondering what these 2 holes/recesses are on the stern under the IMO number.
Thanks in advance.
-
Sunken bits as they are known, used the same way as the ones on the side of the hull.
-
Also often called "Dutch Bollards". One over the other to better accommodate tug line at different drafts when fully loaded and in ballast.
-
Thanks for that. I was just a little curious as to how they were used.
-
I see no reason to remove the thread - and it is informative.